Center pieces and lunch sets in crochet work
Date: 2025-04-16T00:00:00+00:00
Keywords: Crocheting -- Patterns

The Project Gutenberg eBook of Center pieces and lunch sets in crochet work

This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

Title: Center pieces and lunch sets in crochet work

Author: Anne Orr

Release date: April 16, 2025 [eBook #75880]

Language: English

Original publication: Nashville: Anne Orr, 1915

Other information and formats: www.gutenberg.org/ebooks/75880

Credits: Bob Taylor, Aaron Adrignola and the Online Distributed Proofreading Team at https://www.pgdp.net (This file was produced from images generously made available by The Internet Archive)

*** START OF THE PROJECT GUTENBERG EBOOK CENTER PIECES AND LUNCH SETS IN CROCHET WORK ***

Center Pieces and Lunch Sets
IN
CROCHET
WORK

Price 25 Cents

PUBLISHED BY
Anne Orr
NASHVILLE, TENNESSEE

Instructions for Plate No. 1

Illustrated on Cover Page

MATERIALS—6 balls Cordonnet Crochet Cotton No. 10, Steel Crochet Needle No 8.

SMALL MEDALLION

Ch 6, join, 3 ch, 18 t in ring, join; ch 8, join in 5th t; repeat around until you have 4 loops; 15 d in each loop.

MEDIUM MEDALLION

Ch 6, join, ch 3, 18 t in ring, join; ch 4, t in first t, ch 1, t in next t, ch 1, repeat around, join; ch 4, dt between first t, ch 8, 2 dt in between second t, repeat around until you have 9 scallops, then d around, making 15 d to each scallop.

LARGE MEDALLION

First Row—ch 6, fasten.

Second Row—Fill in 18 trebles.

Third Row—18 t in every stitch, with 2 stitches between, then fasten.

Fourth Row—4 trebles in first space, ch 2, 1 t in next space, ch 2, 4 t until all are filled.

Fifth Row—ch 6 in every space until filled.

Sixth Row—ch 6 in every center of ch 6.

Seventh Row—4 t in every 6 ch and 2 ch, between the 4 t until all are filled.

Eighth Row—4 t, 1 stitch between, 3 ch, take up 2 ch with a short stitch, then ch of 3 again, and 4 double stitches, until all are filled.

Ninth Row—2 dt in every 4, t with 8 ch between.

Tenth Row—15 d stitches in every ch that forms the scallop.

ANNE ORR PUBLICATIONS

Cross-stitch Designs, in black and white, Set A, Published 1914.

Cross-stitch Designs, in color, Set B, Copyrighted January 1915.

Cross-stitch Designs, in color, Set C, Copyrighted June 1915.

A Book of Centerpieces and Lunch Sets, Copyrighted September, 1915.

A Book of

Center Pieces and Lunch Sets

Arranged and Published by Anne Orr

INSTRUCTIONS

FOR CROCHETING
STITCHES

CHAIN: Make a loop, insert hook, throw thread over hook, and draw a loop through first one made. Each loop is a chain stitch.

SINGLE CROCHET: Make chain, insert hook through second last chain, throw thread over hook, draw through, throw thread over hook, draw through both loops at once.

TREBLE CROCHET: Throw thread over hook twice, draw a loop through foundation chain, throw thread over again, draw through the two loops, throw thread over and draw through two, thread over and draw through last two.

DOUBLE CROCHET: Throw thread over hook and draw a loop through foundation chain; throw thread over hook and draw through two loops, thread over hook and draw through last two loops.

PICOT: Chain 4 and make single crochet in fourth chain from hook.

SLIP STITCH: Insert hook in foundation chain, draw a loop through it and the loop on hook.

ABBREVIATIONS

ch—stands for chain | sp—stands for space.
sc—stands for single crochet. | h tr—stands for half treble.
dc—stands for double crochet. | p—stands for picot.
tc—stands for treble crochet. | m—stands for mesh.
sl st—stands for slip stitch. | f m—stands for fancy mesh.
st—stands for stitch. | l m—stands for long mesh.

Copyrighted 1915
by
Anne Orr
Nashville, Tenn.

PRICE 25 CENTS

Instructions for Plate No. 2
SIZE OF CENTER PIECE, 24 INCHES

MATERIALS—6 balls Cordonnet Crochet Cotton No. 10, Steel Crochet Needle No. 8.

Each leaf must be worked separately.

First Row—Chain 14, sl st back into 7th st of ch, forming ring 7 ch join into last st of ch, forming 2d ring.

Second Row—6 ch, miss 3 st of ring, 1 sc into 7th st of ch, 4 ch, 1 sc, join into connecting of the two rings, 4 ch, 1 sc, join to top st of small ring, 6 ch, 1 sc, join into same st, 4 ch, 1 sc, join into connection of two rings opposite other ch 4, 4 ch, 1 sc, join into 4th st of next ring, 6 ch st sl at top of leaf.

Third Row—Sl st 9 times over every ch of 6 and sl st 6 times over every ch of 4 around leaf, join.

Fourth Row—Sc into top of each sl st around leaf, join.

Fifth Row—9 sc, join into top of each 9 sc, 6 ch, sl st back to 4th st of ch 6, forming a picot, 1 sc, join into top of 2d sc, skipping one sc, repeat until 16 sc are set around leaf, each separated by a picot, 9 sc, join into top of each 9 sc, join, finishes leaf.

The second leaf is made same as first leaf until sixth row.

Sixth Row—3 sc, join to each 3 sc, place 1st leaf by 2d and sl st to 3d, sc from the beginning of leaf, 1 sc back to 2d leaf top of sc, repeat 3 times to join together, 3 sc, join into each 3 sc, making 9 sc on leaf, 6 ch sl st back to 4th st of ch, forming picot, 1 sc, skip 1 sc, join to top of 2d sc, 2 ch join into 2d picot of other leaf, 2 ch, 1 sc, skip one, 1 sc, join to 2d sc, 2 ch, join to next picot of leaf, joining the two together, 2 ch, 1 sc, join to 2d sc, 6 ch sl st back to 4th st in ch, 1 sc, join into next 2d sc, repeat twice, 7 ch, join to 3d picot on next leaf, turn, fill ch 7 with 12 sc, sl st to top of sc, 6 ch, sl st back to 4th st in ch, 1 sc, go into 2d sc, repeat twice, 2 ch, 1 sc, join to 2d sc, 7 ch, join back to 2d sc of 12 in ch 7, turn, fill in with 10 sc, leaving st of ch, 7 ch, join to next 2d sc in ch 7, repeat until 6 spokes are made, leaving sp at top of each, 2 ch, join to 3d picot of other leaf, then fill out around the 6 spokes, making 6 sc in each, join to top of sc, 6 ch, sl st back to 4th st in ch for picot until you have 16 sc around leaf same as the first leaf, 9 sc join. Make each scallop in same manner, joining each to preceding by 3d and 4th picots at side. For the upper edge 2 sc, join in 1st sp at side of leaf, 5 ch, 3 sc, join into each 3 sc in middle of 9 sc, 5 ch 2 sc, join into 2 sc, join at connection of leaf, 2 sc, join at connection of other leaf, repeat around.

Lower Edge—Fasten in 2d picot on side of leaf, 5 ch, sl st to 2d picot on the other leaf, 5 ch join into next second picot, 5 ch join to top of 1st spoke, 5 ch join to 2d spoke, repeat around, fill in each ch 5 with 6 sc picot 6 sc to each, repeat around.

Plate No. 2

Instructions for Plate No. 3

SIZE OF CENTER PIECE, 18 INCHES

MATERIALS—3 balls of Cordonnet Crochet Cotton No. 10, Steel Crochet Needle No. 8.

Tc around piece, join.

First Row—2 tc into 2 tc, 4 ch, skip 4, dc 2 tc to 2 tc, repeat around, join.

Second Row—5 ch, sl st to middle st of ch 4, repeat around.

Third Row—5 ch, sl st to middle st of ch 5, repeat 5 times, 5 ch, 12 tc into ch of 5, repeat around.

Fourth Row—5 ch, sl st to middle st of ch, repeat 4 times, 5 ch 3 tc between 3d and 4th tc 3tc into same, 1 ch, 3 tc between 6th and 7th tc, 3 tc into same, 1 ch, 3 tc between 9th and 10th tc, 3 tc into same, 5 ch to middle st of ch 5, repeat around.

Fifth Row—5 ch to sl st to ch 5, repeat 4 times, 3 sc between 3d and 4th tc, 3 sc into same, 2 ch, 3 sc between 9th and 10th tc, 3 ch, 3 sc between 15th and 16th tc, 3 sc into same, 5 ch to middle st of ch 5, repeat around.

Sixth Row—5 ch, sl st to middle st of ch 5, repeat 4 times, 3 sc between 3d and 4th, 1 ch, 3 sc into same, 4 ch 3 sc between 3d and 4th sc, 1 ch, 3 sc into same, 5 ch 3 sc between 3d and 4th sc, 1 ch 3 sc into same, 5 ch to middle st of ch 5, repeat around.

Seventh Row—5 ch, sl st to middle st of ch 5, repeat 4 times, 5 ch 3 sc into ch 1, 1 ch 3 sc into same, 5 ch 3 sc into ch 1, 1 ch 3 sc into same, 5 ch 3 sc into ch 1, 1 ch 3 sc into same, 5 ch to middle st of ch 5, repeat around.

Eighth Row—5 ch, sl st to middle st of ch 5, repeat 4 times, 3 tc into ch 1, 1 ch 3 tc into same, 5 ch 3 tc into ch 1, 1 ch 3 tc into same, 1 ch 3 tc into same, 1 ch 3 tc into same, 5 ch 3 tc into ch 1, 1 ch 3 tc into same, 5 ch sl st to ch 5, repeat around.

Ninth Row—5 ch, sl st to middle st of ch 5, repeat 4 times, 3 tc into ch 1, ch 1 3 tc into same, 1 ch 3 tc into middle st of ch 5, 1 ch 3 tc into same, 1 ch 3 tc into 1st 1 ch, 1 ch 3 tc into same st, 1 ch 3 tc into 2d ch 1, 1 ch 3 tc into same, 1 ch 3 tc into 3d ch 1, 1 ch 3 tc into same, 1 ch 3 tc into middle st of ch 5, 1 ch 3 tc into same, 1 ch 3 tc into ch 1, 1 ch 3 tc into same, 5 ch sl st to middle st of ch 5, repeat around.

Tenth Row—5 ch, sl st to middle st of ch 5, repeat 4 times, 5 ch 3 tc into 1st ch 1, 1 ch 3 tc into same, 1 ch 3 tc into 2d ch 1, 1 ch 3 tc into same, 1 ch 3 tc into 3d ch 1, 1 ch 3 tc into same, 1 ch 3 tc into 4th ch 1, 1 ch 3 tc into same, 1 ch 3 tc into 5th ch 1, 1 ch 3 tc into same, 1 ch 3 tc into 6th ch 1, 1 ch 3 tc into same, 1 ch 3 tc into 7th ch 1, 1 ch 3 tc into same, 5 ch sl st to middle st of ch 5, repeat around.

Eleventh Row—4 ch sl st to every 3d st around.

Twelfth Row—4 ch sl st to middle st of ch 4, repeat around.

Plate No. 3

Instructions for Plate No. 4
SIZE OF CENTER PIECE, 27 INCHES

Pineapple and Shamrock Design

MATERIALS—5 balls of Cordonnet Crochet Cotton No. 15, Steel Crochet Needle No. 9.

Make a chain of 64, turn.

First Row—1 sc into 5th st of ch, 3 ch sl st to 3d st of ch from sc, 3 ch, 1 sc to 3d again in ch, 3 ch sl st to 3d st of ch, 3 ch, 1 sc to 3d st of ch, 3 ch, sl st to 3d st of ch, 3 ch, 3 sc into each 3d of ch, 8 ch, skip 8 ch, st, 1 sc into 9th st of ch, 2 ch, 1 sc into same st, repeat 4 times, into same st 8 ch, skip 8 st of ch, into 9th st, sc 9 times, 8 ch, skip 8 st of ch, into 9th st, sc 1 2 ch sc 1 same st 4 times, turn.

Second Row—5 sc into 1st ch of 2 sl st to top of sc, 5 sc into 2d ch 2, sl st to sc, 5 sc into 3d ch 2, sl st to sc 8 ch, sl st to 1st of sc 9, 4 ch, sl st to 2d st of sc 9, 4 ch, sl st to 3d st of sc, 4 ch, sl st to 4th of 9, 4 ch, sl st to 5th st of 9 sc, 4 ch sl st to 6th st of sc 9, 4 ch sl st to 7th st, 4 ch sl st to 8th st, 4 ch sl st to 9th st, 8 ch, sl st to sc 1 5 sc into ch 2, sl st to sc 2, 5 sc into ch 2, sl st into sc 3, 5 sc into ch 2, sl st to sc 4, 8 ch, 2 sc into 1st sc, 1 sc into 2d sc, 2 sc into 3d sc, 6 ch, 1 sc to 1st sc, 6 ch 1 sc to 2d sc, 6 ch, 1 sc into 3d sc, 1 ch, 1 sc into 3d st of ch, turn.

Third Row—4 ch 1 sc to 1st sc, 3 ch sl st to 3d st, 3 ch 1 sc to 2d sc, 3 ch sl st to 3d st, 3 ch 1 sc to 3d sc, 3 ch sl st to 3d st, 3 ch 2 sc into 1st sc, 1 sc to 2d sc 1 ch, 1 sc to 4th sc, 2 sc into 5th sc, 8 ch, 1 sc to middle point of leaf, 2 ch 1 sc to same st, repeat 4 times, 8 ch sl st to ch 4, repeat across, 8 ch sc to leaf, repeat as before, turn.

Fourth Row—Form leaf as in 2d row, 8 ch sl st to ch 4, repeat across, 8 ch sl st to sc 1, repeat leaf, 8 ch 2 sc to 1st sc, 1 sc to 2d sc, 1 ch, 1 sc to ch 1, 1 ch 1 sc to sc 2d, 2 sc to last sc, 6 ch 1 sc to 1st sc, 6 ch, 1 sc to 2d sc, ch 6 1 sc to 3d sc, 1 ch 1 sc to 3d st, turn.

Fifth Row—Repeat as in 3d row to sc in 1st sc, 1 ch, 1 sc to 2d sc, repeat, skipping one sc each time, 8 ch to middle leaf, repeat same across as row 4, turn.

Sixth Row—Same as 4th row, turn.

Seventh Row—Same as 5th row, turn.

Eighth Row—Same as 6th row, turn.

Ninth Row—Same as 7th row, turn.

Tenth Row—Form leaf, 8 ch sl st to ch 4, 8 ch, repeat same as row 8, turn.

Eleventh Row—Same as 9th row until point of pineapple, 1 sc 1 ch, repeat 4 times in to sl st 8 ch 1 sc to point of leaf, repeat 4 times, turn.

Twelfth Row—Form leaf 8 ch to 1 sc form leaf, 8 ch to 1st sc form leaf, and repeat as in 10th row, turn.

Thirteenth Row—Same as 11th row to 1 st sc, 2 sc into 1 st sc, 1 sc to 2d sc, 8 ch 1 sc to 5th sp, repeat 4 times, 8 ch, 9 sc into last st of sc, 8 ch 1 sc to point of leaf, repeat 4 times, turn. Makes 1 scallop, repeat until large as desired.

Plate No. 4

Instructions for Plate No. 5
SIZE OF CENTER PIECE, 27 INCHES

MATERIALS—9 balls of Cordonnet Crochet Cotton No. 15, Steel Crochet Needle No. 9.

Chain 6, join.

First Row—22 sc, join into ch 6, join.

Second Row—5 ch, sl st to top st of 2d sc, 5 ch sl st to top of 4th sc, repeat around, making 11 loops.

Third Row—Draw thread up loosely and sl st into middle of 1st loop of 5 st, 3 ch sl st into 2d loop of ch 5, and repeat around.

Fourth Row—sl st into ch 3, 4 sc join into same ch 3, sl st into ch 3, sl st join into 2d ch 3, 4 sc into same ch 3, sl st into same ch 3 sl st into 3d ch 3, and repeat around.

Fifth Row—15 ch st, throw thread over needle once and join back into 6th st of ch from last end, forming a small ring on end of ch, 1 ch, 1 sc, skip 1 st of ch, go into 2d st from ring, making a sp, 1 ch, 1 sc, skip 1 st, join into 2d st of ch from last sp, making 3 sps, 11 sc, joined over rest of ch of 15, filling it in, throw thread over needle once and go into top of middle of lower fan, turn, 5 ch, throw thread over needle once, go into top of 9th sc of 11th sc, 1 ch 1 sc, join to top of 10th sc, 1 ch, 1 sc, join to top of 11th sc, 1 ch, 1 sc, join to top of 12th sc, turn, make 5 ch st, throw thread over needle once, join to top of 1st sc, 1 ch, 1 sc, join to top of 2d sc, 1 ch, 12 sc, fill in ch 5, throw thread over needle once and go in between lower fan’s turn, repeat the same for each spoke until around and join.

Sixth Row—5 ch, sl st into ch 5 on point of spoke, repeat around.

Seventh Row—8 sc joined into ch 5, repeat same around and join.

Eighth Row—5 ch, sl st to top of middle st of 8 sc in ch 5, 5 ch sl st between 8 sc into ch 5, repeat around.

Ninth Row—4 ch, sl st into middle of loop of ch 5, repeat around.

Tenth Row—1 sl st into ch 4, 5 sc into same ch of 4, 1 sl st into same ch of 4, 1 sl st into next ch 4, 5 sc join into same ch of 4, sl st into same, and repeat around.

Eleventh Row—Same as 5th row.

Repeat the 5th, 6th, 7th, 8th, 9th and 10th rows over 3 times in rotation, as given, and the last time leave off 8th, 9th and 10th rows, stopping on the one same as 7th row.

Start scallop, 8 sc joined to each lower 8 sc, 2 ch 12 sc, skip 2, lower sc, st and join into each, 12 sc 2 ch, skip 2, st of sc 8 sc into each lower 8 sc, repeat around.

Second Row—sl st into top of 2d sc of the 8 sc, repeat into 6 st of the 8 sc, leaving one, 3 ch, 12 sc join into each of lower 12 sc, 3 ch sl st into 2d st of 8 sc for 6 times, leaving one, 3 ch 12 sc join to each lower 12 sc, and repeat same around.

Third Row—sl st join to 2d sl st, repeat 5 times, 4 ch 1 sc join to top of 1st sc of 12, 1 ch 1 sc join to 2d st of sc 12, repeating 12 times, 4 ch sl st to 2d lower sl st, repeat into each lower sl st, and repeat same around.

Fourth Row—sl st into 2d sl st below, sl st into each 4, sl st 4 ch, 1 sc join to 1st sc 1 ch, 1 sc join to 2d sc, repeat across the 12 sc, ch 4, and repeat around.

Fifth Row—sl st 3 times into 4 lower sl st, 5 ch, 1 sc join to 1st sc of 12, 2 ch, 1 sc join to 2d sc of 12 sc, repeat around.

Sixth Row—sl st twice into lower sl st of 3, 5 ch, 1 sc join to top of 1st sc of 12 sc, 2 ch, 1 sc join to 2d sc of 12 sc, repeat around.

Seventh Row—sl st once into lower sl st of 2, 5 ch, 1 sc join to 1st sc of 12 sc, 3 ch, 1 sc join to 2d sc of 12 sc, repeat across, 5 ch, sl st 1 to sl st 2, repeat around, 3 ch, 1 sc join to middle st of ch 5, 3 ch join to 1st sc, 3 ch join to 2d sc, and repeat around.

Edge—sl st into ch 3, 1 ch sl st into same ch, 1 ch sl st into same, repeating 5 times into each ch of 3 around.

Plate No. 5

Instructions for Plate No. 6
SIZE OF CENTER PIECE, 32 INCHES

Shell Center Piece

MATERIALS—6 balls of Silkine Crochet Cotton No. 10, 1 Steel Needle No. 9.

Chain of 12 st, join, hold ch ring around finger, wrap thread around finger with ch 3 times, sl st and tie, sl st over ch and thread 27 times making a padded ring.

First Row—6 ch, 1 sc, join to 3d sl st of ring, 3 ch, 1 sc, skip 2 sl st in ring, join in 3d, repeat 9 times, join.

Second Row—3 ch, sl st to top of sc, repeat around.

Third Row—6 sc, join into ch 3, sl st to top of sc 1, repeat around.

Fourth Row—4 ch, sl st to top of sc 1, holding petals that are made over with finger so ch 4 will be underneath petals, repeat around.

Fifth Row—8 sc, join into ch 4, sl st 1, repeat around.

Sixth Row—1 sc, join to 2d st of sc 8, 2 ch, 1 sc, join to same st, 4 ch, 1 sc, join to 5th st of sc 8, repeat same over 7 petals, 4 ch, 1 sc, join to 2d st of sc 8, 1 ch, 1 sc, join to 5th st of petal, 1 ch, 1 sc, join to next petal, 2d st, 1 ch, 1 sc join to 5th st of petal, 4 ch, join.

Seventh Row—1 sc, join in ch 2 between sc, 2 ch, 1 sc, join in same, 4 ch, 1 sc, join in next ch 2 and repeat same 14 times, 1 ch, 1 sc, join in lower ch 4, 1 ch, 1 sc, join in to top of sc, repeat across, join.

Eighth Row—2 sc, join into ch 2 between sc, 2 ch, 2 sc, join into same, 4 ch, 2 sc, join to next ch 2, repeat around 14 times, 1 ch, 1 sc, join into ch 1, 1 ch, 1 sc, join to top of sc, repeat across.

Ninth Row—Same as 8th row.

Tenth Row—3 sc, join into ch 2 between sc 2, 2 ch, 3 sc, join into same ch, 4 ch, 3 sc, join into next ch 2 between sc 2, repeat same 14 times, finish across same as last row.

Eleventh Row—3 sc, join into ch 2 between sc 3, 2 ch, 3 sc, join into same ch, 2 ch, sl st to middle st of ch 4, 2 ch, 3 sc, join into next ch 2 between sc 3, repeat around 14 times, finish across as before.

Twelfth Row—Same as 11th row, except ch between fans are 4 ch, sl st, to lower sl st, 4 ch, back to fan.

Thirteenth Row—3 sc, join into ch 2 between sc 3, 2 ch, 3 sc, join into same ch, 9 ch, sl st to ch 2 between sc 3, repeat around to last fan, 3 sc, join into ch 2 between sc 3, 2 ch, 3 sc, join into same ch, repeat across as before.

Fourteenth Row—3 sc, join into ch 2 of fan, 2 ch, 3 sc, join into same ch, fill in ch 9 with 14 sc, repeat around to last fan, make fan, and finish across same as before.

Fifteenth Row—Make fan, 5 sc, join into each first five sc in ch 9, 4 ch, skip 4 sc in ch 9, 5 sc, joined to top of each last 5 sc in ch 9, 4 ch, 4 sc join to top of 4 sc in ch 9, skipping 4 sc each time repeat around and make fan. Make sp across same as before.

Sixteenth Row—Make fan the same, 6 ch, 3 sc, join into ch 4, 2 ch, 3 sc, join into same ch, repeat around, make fan. Sps across the same.

Seventeenth Row—Make fan the same, 1 ch, sl st to middle st of ch 6, 1 ch, 3 sc, join into ch 2 of fan, 2 ch, 3 sc, join into same ch, repeat around. Make fan, repeat across the same.

Eighteenth Row—Make fan the same, ch, sl st to middle of lower ch, 3 ch, 3 sc, join into ch 2 of fan, 2 ch, 3 sc join into same, repeat around and across spaces, finishing one Medallion.

Repeat same directions for each.

Plate No. 6

Instructions for Plate No. 7
SIZE OF LUNCH PIECE, 45 INCHES

Medallion Center Piece

MATERIALS—10 balls of Cordonnet Crochet Cotton No. 50, Steel Crochet Needle No. 13.

Chain of 8 st, join.

First Row—32 sc into ch of 8 st, join.

Second Row—2 sc join between 1st and 2d sc, 2 ch 2 sc join between 2 sc, skipping 2 sc, repeating 12 times, 4 ch sl st between 2 sc, skipping 2 sc, repeat 3 times.

Third Row—4 ch, 3 sc join into 1st ch 2, 2 ch, 3 sc join into same, 4 ch, 3 sc, into 2d ch 2, 2 ch, sc 3, into same, repeating 11 times, 4 ch, sl st to middle st of ch 4, repeat 4 times.

Fourth Row—4 ch, 3 sc into ch 2 between sc 6, 2 ch, 3 sc into same, 4 ch 3 sc into 2d ch 2 between sc 6, repeat same 11 times, 4 ch, sl st to middle st of ch 4, repeat 5 times.

Fifth Row—Same as 4th row.

Sixth Row—4 ch 3 sc into ch 2 of 1st sc 6, 3 sc into same, 5 ch, and repeat as in 5th row.

Seventh Row—4 ch sl st into ch 2 of 1st sc 6, 6 ch, 1 sc, catch all 4 lower ch 4, draw loosely, 6 ch sl st into ch 2 of 2d, sc 6, repeating around all the fans, 4 ch, join across as before.

Eighth Row—4 ch, 9 sc into ch 6, going into ch 6, 9 times around to ch 4, repeating across as before.

Ninth Row—4 ch, 3 sc join to top st of 4th, 5th and 6th sc of sc 9, 4 ch and repeat around to ch 4, and repeat ch 4 across.

Tenth Row—4 ch, 3 sc into ch 4, 2 ch, 3 sc into same, repeating around to ch 4, repeat across ch 4 as before.

Eleventh Row—4 ch, 3 sc into ch 2 of sc 6, 5 ch into 2d ch 2 of sc 6, repeating around to ch 4, repeat across ch 4 as before.

Twelfth Row—Same as 11th row.

Thirteenth Row—4 ch, 1 sc into ch 2 of sc 6, 3 ch, sl st back through sc 1, repeating 6 times, 5 ch 1 sc, catching up all 3 ch of 5, draw loosely, 5 ch 1 sc into ch 2 of 2d sc 6, repeat same as before, around to ch 4, repeat ch 4 across as before.

To join Medallions—Catch the point of 3d shell of 2 medallions and sl st together, and fill in between each with ch of 4 back and forth to top, then across ch 4 on top and repeat until all are joined.

Plate No. 7

Instructions for Plate No. 8
SIZE OF CENTER PIECE, 27 INCHES

Pineapple and Acorn Design

MATERIALS—Four balls of Cordonnet Crochet Cotton No. 10, Steel Crochet Needle No. 8.

First Row—tc around center piece.

Second Row—2 tc into top of 2 lower tc, ch 4, skip 3 lower tc and tc 2 into top of 4th, repeat around, join.

Third Row—5 ch, sl st in middle of ch, ch 4, repeat around.

Fourth Row—2 tc into ch 5, 1 ch, tc 2, to ch 5, 4 ch, 14 tc into ch 5, skip 1 link, repeat around, join.

Fifth Row—2 tc into ch 1, 1 ch, 2 tc to ch 1, 4 ch, sl st to 1st, tc of 14, 4 ch, sl st to 3d of tc 14, 4 ch, sl st to top of 5th tc, 4 ch sl st to 7th of tc 14, 4 ch, sl st to 9th of tc 14, 4 ch sl st to 11th of tc 14, 4 ch sl st to 13th of tc 14, 4 ch, 2 tc into ch 1, 1 ch, 2 tc to ch 1, 4 ch sl st to 1st, tc 14, and repeat around.

Sixth Row—2 tc into ch 1, 1 ch, 2 tc into ch 1, 4 ch sl st to middle of ch 4, repeat around.

Seventh Row—Same as 6th row.

Eighth Row—2 tc into ch 1, 1 ch, 2 tc into ch 1, 1 ch, 2 tc into ch 1, 5 ch, sl st into middle of ch 4, repeat around.

Ninth Row—2 tc into 1st ch 1, 1 ch, 2 tc into ch 1, 1 ch 2 tc into 2d ch 1, 1 ch 2 tc into ch 1, 5 ch, sl st into ch 4, repeat around.

Tenth Row—2 tc into 1st ch 1, 1 ch, 2 tc in ch 1, 1 tc into 2d ch 1, 3 ch, 1 tc into ch 1, 2 tc into 3d ch 1, 1 ch 2 tc into ch 1, 5 ch sl st to ch 4, repeating around.

Eleventh Row—2 tc into 1st ch 1, 1 ch 2 tc into ch 1, 1 ch 12 tc into ch 3, 1 ch, 2 tc into 2nd ch 1, 1 ch, 2 tc into ch 1, 5 ch sl st to ch 4, repeat around.

Twelfth Row—4 tc into 1st ch 1, 1 ch 1 tc into top of 1st tc of 12, 1 tc into top of 2d tc, 2 tc into top of 3d tc, 1 tc to 4 tc, 1 tc to 5th tc, 2 tc to 6th tc, 1 tc to 7th tc, 1 tc to 8th tc, 2 tc to 9th tc, 1 tc to 10th tc, 2 tc to 11th tc, 1 tc to 12th tc, 1 ch, 4 tc into 2d ch 1, 6 ch to middle of ch 4, repeat around.

Thirteenth Row—4 ch sl st to top of each 3d st around.

Fourteenth Row—4 ch into middle st of ch 4 around.

Fifteenth Row—Same as 14th row.

Sixteenth Row—5 ch sl st back into 2d st of ch, 2 ch sl st into middle st of ch 4, repeat around.

Plate No. 8

Instructions for Plate No. 9
SIZE OF CENTER PIECE, 36 INCHES

MATERIALS—2 spools of Carpet Warp, Steel Crochet Needle No. 5.

First Row—5 ch, 3 sc join all into 1st st of ch 1 ch 3 sc join into same st 2 ch, turn, 3 sc join into ch 1 between sc 3, 1 ch, 3 sc join into same st, 2 ch, turn and repeat over until 25 fans are made, 6 ch, join into ch 2 at side of 1st fan, 6 ch, join into ch 2, side of 2d fan, repeat until 9 loops are made, turn.

Second Row—sl st over the 6 ch, st 10 times, in each, until 9th loop sl st over 5 times, leaving half the loop, turn.

Third Row—6 ch sl st to middle st of loop 2, repeat across, turn, sl st over ch 6, going in each 10 times as before until last loop is reached, sl st 5 st over leaving half of loop, turn.

Fourth Row—Repeat same as 3d row.

Fifth Row—Same as 4th row.

Sixth Row—Same as 4th row.

Seventh Row—Same as 4th row.

Eighth Row—Same as 4th row.

Ninth Row—Same as 4th row.

Tenth Row—Leaves only one loop, sl st over, going in 10 times, sl st over the side of loop left going in 5 times, repeat down all loops the same, 2 ch, 3 sc, join into ch 1 in fan. 1 ch, 3 sc join into same st, 2 ch, turn.

First Row around point—3 sc join in ch 1 in fan, 1 ch 3 sc join into same st. 1 ch, 1 sc, join into ch 2, by side of fan, 1 ch, 1 sc to side of fan. 1 ch 1 sc between fan, repeat around, point and join to ch 2 by 1st fan, turn.

Second Row—4 ch 1 sc, into ch 1, repeat around, 3 sc join in ch 1 of fan, 1 ch, 3 sc to same, 2 ch, turn.

Third Row—3 sc, join in ch 1 of fan, 1 ch 3 sc into same st, 4 ch, join to ch 4, repeat around, join to ch 2 of fan, turn.

Fourth Row—5 ch, join to ch 4, repeat around making fan as before, turn.

Fifth Row—Make fan, repeat ch of 5 around as before, turn.

Sixth Row—Same as 4th row.

Seventh Row—Same as 5th row, join to last of ch 2, turn.

Eighth Row—8 sc, filling in ch 5, sl st 1 into 2d ch 5, 8 sc fill in next ch 5, repeating around and make fan as before, making 25 fans as at first for 2d point and repeat as in first point until 6 points are made and join fan between points, join thread to middle of scallop, 8 ch join to middle scallop on opposite point, turn, sl st over 14 times, 1 ch join in point of scallop, 8 ch, sl st to middle of loop, 8 ch join to point of fan, turn, sl st over 14 times each loop, turn, 2 ch 1 sc join to each 3d st of loop across, turn, 4 ch, sl st to ch 2, repeat across, turn. 4 ch, sl st ch 4 across, turn, 8 sc fill in ch 4, sl st 1 into 2d ch 4, repeat across row across top of fans around piece, 3 sc join in ch 2 on side of fan, 1 ch 3 sc join to next ch 2 by side of fan, repeat around.

Plate No. 9

Instructions for Plate No. 10

SIZE OF LARGE CENTER PIECE, 18 INCHES.

SIZE OF DOYLIE (LARGE) 12 INCHES.

SIZE OF DOYLIE (SMALL) 6 INCHES.

Star Lunch Set

MATERIALS 10 balls Cordonnet Crochet Cotton No. 15, Steel Crochet Needle No. 7.

Center Piece

First Row—Chain of 6, join, 3 sc, join in chain, 2 ch 3 sc, join in ch, 2 ch; repeat 8 times same into ch, join.

Second Row—2 sc, join to top of 1st sc, 1 sc join to 2d sc, 2 sc join to 3d sc; 2 ch, 2 sc, join to 1st sc as before, and repeat around, join.

Third Row—2 sc join to 1st sc, 1 sc to 2d sc, 1 sc to 3d sc, 1 sc to 4th sc, 2sc to 5 sc, 2 ch 2 sc to 1st sc, and repeat as before, and around, join.

Fourth Row—Same as 3d row; widen with 2 sc in 1st and last st of each sc of diamond, join.

Fifth Row—Same as 4th row.

Sixth Row—Same as 4th row.

Seventh Row—Same as 4th row.

Eighth Row—Same as 4th row.

Ninth Row—Same as 4th row.

Tenth Row—Same as 4th row.

Eleventh Row—Same as 4th row.

Twelfth Row—Same as 4th row.

Thirteenth Row—Same as 4th row.

Fourteenth Row—Same as 4th row.

Fifteenth Row—Same as 4th row.

Sixteenth Row—Same as 4th row.

Seventeenth Row—1 sc, join to 2d sc of diamond and repeat across diamond, leaving one sc out on each side to narrow down; 2 ch, 1 sc, join to top of 1st sc of diamond, 2 ch 1 sc join to 1st st of next diamond. Repeat around, join.

Eighteenth Row—Same as 17th row, making 2 more sp each time between.

Nineteenth Row—Same as 18th row.

Twentieth Row—Same as 18th row.

Twenty-first Row—Same as 18th row.

Twenty-second Row—Same as 18th row.

Twenty-third Row—Same as 18th row.

Twenty-fourth Row—Same as 18th row in diamond, 7 sp, 4 sc into 8 sp; 7 sp make diamond, always leaving 1 sc on each side of diamond.

Twenty-fifth Row—Same as 24th row for diamond, 8 sp 2 sc, join to 1st sc, 1 sc to 2d sc, 1 sc to 3d sc, 2 sc join to 4th sc, 8 sp, repeat around.

Twenty-sixth Row—Same as 25th row, making one less on each side of diamond, and adding 2 sc on each side of points started.

(1) Row—Same as 26th row. | (7) Row—Same as 26th row.
(2) Row—Same as 26th row. | (8) Row—Same as 26th row.
(3) Row—Same as 26th row. | (9) Row—Same as 26th row.
(4) Row—Same as 26th row. | (10) Row—Same as 26th row.
(5) Row—Same as 26th row. | (11) Row—Same as 26th row.
(6) Row—Same as 26th row. | (12) Row—2 ch 1 sc join to 1 sc of sp; repeat across; 2 ch join to 3d sc of point; repeat around.

Scallop

1 tc join into ch 2, 1 ch 1 tc join into same; repeat 12 times, going to same ch; sl st into 3d sp; 1 tc join into 3d sp. 1 ch 1 tc join in same sp; repeat 12 times; repeat same around. 4 ch join to sp between tc, 4 ch, join in sp, repeat around.

Second Size Piece

Made by same directions as Center Piece, until 8 rows are made.

Ninth Row—-Same as 17th row in directions of Center Piece. Repeat same until 8 rows are made, making 2 sp more each row and 2 sc less on diamond. Add Scallop same as Center Piece directions.

Small Piece

Same directions as Center Piece for 6 rows.

Seventh Row—Same as 17th row. Repeat same directions as Center Piece for 6 rows. Add Scallop, same directions as Center Piece.

Plate No. 10

Instructions for Plate No. 11

SIZE OF CENTER PIECE, 20 INCHES

SIZE OF PLATE DOYLIE, 12 INCHES

SIZE OF TUMBLER DOYLIE, 6 INCHES

Lunch Set in Novelty Braid and Crochet

MATERIALS—6 balls Cordonnet Crochet Cotton No. 30, 18 yards Novelty Braid No. 4, Steel Crochet Needle No 10.

Center Piece

Circular piece of irish linen 28 inches across, turn in narrow hem and sc very closely around over hem and join.

First Row—3 ch, 1 sc, join to top st of sc, 1 ch 1 sc, join to top of next sc, repeating around, join to chain 3 at beginning.

Second Row—Same as 1st row.

Third Row—Same as 1st row.

Fourth Row—4 ch, 1 sc, join to 1st sc, 2 ch 1 sc, join to 2d sc, repeat around, join to ch 4 at beginning.

Fifth Row—Same as 4th row.

Sixth Row—3 ch, sl st into ch 2, repeat around.

Seventh Row—Same as 6th row.

Eighth Row—4 ch, sl st into ch 3, repeat around.

Ninth Row—Same as 8th row.

Tenth Row—Same as 8th row.

Eleventh Row—2 ch sl st into 1st loop in novelty braid, 2 ch join to ch 4, 2 ch join to 1st loop in next block of braid, 2 ch join to ch 4, 4 ch join to last loop of braid, sl st into first loop of next block of braid, 4 ch join to lower ch 4, 2 ch join to last loop in braid, 2 ch join to next block of braid 1st loop, 2 ch join to ch 4, 4 ch join to last loop of braid, 1 ch join to 1st loop on next block of braid, 4 ch join to lower ch 4, repeating around.

Twelfth Row—4 ch join in first loop of braid on upper side, 4 ch join to last loop on same block of braid, 2 ch join to 1st loop on next block of braid, 4 ch join last loop on same block, repeat around.

Thirteenth Row—4 ch, join into ch 2, joining blocks of braid, repeating 4 times into same ch, 6 ch to next ch 2 between blocks 6 ch join to next ch 2, repeat around.

Fourteenth Row—4 ch join to ch 4, 4 ch join to next ch 4, 4 ch join in ch 6, 4 ch join to ch 6, repeat around.

Fifteenth Row—Same as 10th row.

Sixteenth Row—Same as 10th row.

Seventeenth Row—Same as 10th row.

Eighteenth Row—Same as 11th row.

Nineteenth Row—Same as 12th row.

Twentieth Row—Same as 13th row.

Twenty-first Row—Same as 14th row.

Twenty-second Row—Same as 15th row.

Twenty-third Row—Same as 15th row.

Twenty-fourth Row—Same as 15th row.

Twenty-fifth Row—Same as 15th row.

Twenty-sixth Row—Same as 11th row.

Twenty-seventh Row—Same as 12th row.

Twenty-eighth Row—Same as 13th row.

Twenty-ninth Row—Same as 14th row.

Thirtieth Row—Same as 15th row.

Thirty-first Row—Same as 15th row.

Thirty-second Row—5 ch, sl st back into 2d st of ch 5, 2 ch join into ch 4, 5 ch, sl st back to 2d st of ch 5, 2 ch join to ch 4, repeat around.

Plate Doylie

Circular piece of Irish linen 12 inches across, turn in small hem, sc over closely around, make by same directions as centerpiece up to 8th row, finish with row 32 of centerpiece.

Tumbler Doylie

Circular piece of Irish linen 5 inches across, turn in small hem, sc over hem closely.

First Row—Same as 1st row in centerpiece.

Second Row—Same as 2d row in centerpiece.

Third Row—Same as 8th row in centerpiece. Repeat same directions as centerpiece to 18th row, finish with row 32.

Plate No. 11

Instructions for Plate No. 12

Rose Lunch Set

MATERIALS—5 balls Silkine Crochet Cotton No. 30, 2 bolts of Novelty Braid, 1 Steel Crochet Needle No. 11.

Center Piece Insertion

Make rose in center, 5 ch st and join.

First Row—6 ch, 1 sc, join in ch 5, 2 ch, 1 sc, join into ch 5, repeat 7 times, join.

Second Row—6 sc, join into ch 2, 1 sl st to lower sc 1, repeat 7 times.

Third Row—4 ch, sl st into lower sl st, repeat 7 times.

Fourth Row—9 sc, join into ch 4, sl st to lower sl st, repeat 7 times. Make 13 roses.

Take Novelty Braid, have two ends, tie with thread, every 3d block in braid cross the braid and tie, repeat 13 times, join to first end and tie, place rose in between tied braid, join thread to middle loop in block of braid, 5 ch st, sl st back to 2d st, 2 ch sl st to middle st of petal in rose, 5 ch, sl st back to 2d st, 2 ch, sl st to middle loop in next block of braid, repeat around the rose and repeat same until the 13 roses are in.

First Row—Above braid join thread to 1st loop in braid, 6 ch, 1 tc, join in middle loop in block of braid, 3 ch, 1 tc, join to last loop in same block of braid, 3 ch, 1 tc, join in middle of sp between blocks in braid, repeat around, join.

Second Row—4 tc, join into ch 3, 1 ch, 4 tc, join into next ch 3, repeat 8 times, 4 tc, skip 2, ch 4, go into 3d ch 4, repeat same around, join.

Third Row—1 tc, join in ch 1 between tc 4, 1 ch, 1 tc, join into same ch 1, tc 1, join into next ch 1 between tc 4, repeat same 7 times, 1 tc, skip 1 sp, go in 2d ch 1 between tc 4, repeat around, join.

Fourth Row—2 sc, join to ch 1, 3 ch sl st back to top of sc, 2 sc, join to next ch 1, 3 ch sl st back to top of sc, repeat around, join.

First Row—Below—Braid same as 1st row above.

Second Row—Same as 2d row.

Third Row—Same as 3d row.

Fourth Row—3 sc, join into ch 1, 3 ch, sl st back to top of last sc 3, repeat around, join.

Center Piece Edging

Make 26 roses same as in Insertion. Fix braid the same, making 26 loops same as the 13 in Insertion, join roses in the same.

First Row above braid—Same as 1st row in Insertion.

Second Row—Same as in Insertion.

Third Row—1 tc, join in ch 1 between tc 4, 2 ch, 1 tc, join into same ch 1, 2 ch, 1 tc, join to 2d ch 1 between tc 4, repeat 7 times, 1 tc, skip 1 sp, go in 2d ch 1 between tc 4, and repeat around.

Fourth Row—Same as 3d row.

Fifth Row—4 sc, join into ch 2, 3 ch, sl st back to last sc 4, repeat around.

First Row below braid—same as 1st row below braid for Insertion.

Second Row—Same as 2d row for Insertion.

Third Row—Same as 3d row above braid.

Fourth Row—2 tc join into ch 2, between lower tc 2, 2 ch, 2 tc, join into same ch. 2 tc, join into 2nd ch 2, between tc 2, 2 ch, 2 tc, join into same ch, repeat around.

Fifth Row—3 ch, 1 tc, join into ch 2 between tc 2. 3 ch, sl st, back to top of tc, repeat same 4 times into same ch, 3 ch, sl st, between tc 2. 3 ch, 1 tc, join into next ch 2, between tc 2, repeat same around.

Second Size Piece of Lunch Set

MATERIALS—2 balls of Silkine Crochet Cotton No. 30, 1 bolt Novelty Braid, 1 Steel Crochet Needle No. 11.

Make 8 roses by same directions as rose in centerpiece, 1 size smaller braid, take 2 ends of braid and tie, skip 3 blocks in braid, cross and tie, repeat until 8 loops are made, join and tie, take the 8 roses and fill in each 8 loops by same directions as for centerpiece.

First Row top of braid—1 tc, join to 1st loop in block of braid, 2 ch, 1 tc, join in middle loop in block of braid, 2 ch, 1 tc, join in last loop of block, 2 ch, 1 tc, join in sp between block of braid, repeat same around, join.

Second Row—3 tc, join into ch 2, repeat 8 times, skip 2 sp, 3 tc, join into ch 2, repeat around, join.

Third Row—2 tc, join between 3d and 4th tc, 1 ch, 2 tc, join between next 3d and 4th tc, repeat 7 times, 2 tc, skip, 6 tc, join between 6th and 7th tc, and repeat same around.

Fourth Row—2 tc, join between 2d 2 tc, 1 ch, 2 tc, join between next 2 tc, repeat 5 times, 1 tc between tc 2, repeat same around, join.

Fifth Row—Same as 4th row, join.

Sixth Row—Same as 4th row, join.

Make rose with 3 rows of petals, same directions as for centerpiece, place in center sp, join thread middle of rose petal, 4 ch, sl st back to 2d st of ch, 2 ch, join to tc 2, 4 ch, sl st back to 2d st of ch, 2 ch, join between petals, repeat around until rose is filled in.

First Row below braid—Same as 1st row above.

Second Row—4 tc, join in 2d ch 2, 1 ch, 4 tc, join in next ch 2, repeat 12 times, 4 tc, skip 2, ch 2, go in 3d ch 2, repeat around, join.

Third Row—1 tc, join in ch 1 between tc 4, 2 ch, 1 tc, join into same ch, 2 ch, 1 tc, join in next ch 1, repeat around, join.

Fourth Row—2 tc, join into ch 2 between tc, 2 ch, 2 tc, join into same ch, 1 ch, 2 tc, join into next ch 2 between tc, repeat 9 times, skip one ch 2, 1 tc, join between tc, skip ch 2, 2 tc, join to next ch 2, repeat as before around and join.

Fifth Row—Same as last row on centerpiece.

Third Size Piece of Lunch Set

MATERIALS—2 balls Silkine Crochet Cotton No. 30, 1 bolt Novelty Braid, 1 Steel Crochet Needle No. 11.

Make 5 roses of one row of petals, tie and fix braid same as in second piece, fill in sp between braid with rose same as in second piece.

First Row above braid—Same as 1st row above in second piece, making sc st instead of tc.

Second Row—3 sc, join into 2d ch 2, 3 ch, sl st back to last sc, 3 sc, join to next ch 2, repeat 4 times, 3 sc, skip 2 ch 2, go in 3d ch 2, repeat as before around.

Fill rose in center same as in second piece.

Same directions for finishing lower edge as in second piece.

Fourth Size Piece of Lunch Set

Piece of braid 8 blocks long, tie, 1 sc, join to 1st loop in braid, 1 ch, 1 sc, join to middle loop, 1 ch, 1 sc, join to last loop of block, 1 ch, 1 sc, in sp between blocks, 1 ch, 1 sc, join to next block, 1st loop, repeat around, join.

Second Row—1 sc, join to top of lower sc, 1 ch, 1 sc, join to next sc, repeat around, join.

Make rose same directions and fill in sp same as second piece.

On lower side of braid use same directions as in second piece.

Plate No. 12

SET B

ANNE ORR CROSS-STITCH DESIGNS; PRINTED IN COLORS
WITH THEIR VARIED USES ON BACK OF EACH SHEET

SET C

A TRAY AND A LUNCHEON-SET SHOWING SOME OF THE BEAUTIFUL WAYS OF USING THESE DESIGNS

*** END OF THE PROJECT GUTENBERG EBOOK CENTER PIECES AND LUNCH SETS IN CROCHET WORK ***

Updated editions will replace the previous one—the old editions will be renamed.

Creating the works from print editions not protected by U.S. copyright law means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg™ electronic works to protect the PROJECT GUTENBERG™ concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for an eBook, except by following the terms of the trademark license, including paying royalties for use of the Project Gutenberg trademark. If you do not charge anything for copies of this eBook, complying with the trademark license is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. Project Gutenberg eBooks may be modified and printed and given away—you may do practically ANYTHING in the United States with eBooks not protected by U.S. copyright law. Redistribution is subject to the trademark license, especially commercial redistribution.

START: FULL LICENSE

THE FULL PROJECT GUTENBERG™ LICENSE

PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg™ mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase “Project Gutenberg”), you agree to comply with all the terms of the Full Project Gutenberg License available with this file or online at www.gutenberg.org/license.

Section 1. General Terms of Use and Redistributing Project Gutenberg electronic works

1.A. By reading or using any part of this Project Gutenberg electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B. “Project Gutenberg” is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg electronic works. See paragraph 1.E below.

1.C. The Project Gutenberg Literary Archive Foundation (“the Foundation” or PGLAF), owns a compilation copyright in the collection of Project Gutenberg electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is unprotected by copyright law in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg mission of promoting free access to electronic works by freely sharing Project Gutenberg works in compliance with the terms of this agreement for keeping the Project Gutenberg name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg License when you share it without charge with others.

1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg work. The Foundation makes no representations concerning the copyright status of any work in any country other than the United States.

1.E. Unless you have removed all references to Project Gutenberg:

1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg License must appear prominently whenever any copy of a Project Gutenberg work (any work on which the phrase “Project Gutenberg” appears, or with which the phrase “Project Gutenberg” is associated) is accessed, displayed, performed, viewed, copied or distributed:

This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg™ License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

1.E.2. If an individual Project Gutenberg electronic work is derived from texts not protected by U.S. copyright law (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase “Project Gutenberg” associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg trademark as set forth in paragraphs 1.E.8 or 1.E.9.

1.E.3. If an individual Project Gutenberg electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg License for all works posted with the permission of the copyright holder found at the beginning of this work.

1.E.4. Do not unlink or detach or remove the full Project Gutenberg License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg.

1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg License.

1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg work in a format other than “Plain Vanilla ASCII” or other format used in the official version posted on the official Project Gutenberg website (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original “Plain Vanilla ASCII” or other form. Any alternate format must include the full Project Gutenberg License as specified in paragraph 1.E.1.

1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg works unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg electronic works provided that:

- • You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, “Information about donations to the Project Gutenberg Literary Archive Foundation.”

- • You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg™ License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg™ works.

- • You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work.

- • You comply with all other terms of this agreement for free distribution of Project Gutenberg™ works.

1.E.9. If you wish to charge a fee or distribute a Project Gutenberg™ electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from the Project Gutenberg Literary Archive Foundation, the manager of the Project Gutenberg™ trademark. Contact the Foundation as set forth in Section 3 below.

1.F.

1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread works not protected by U.S. copyright law in creating the Project Gutenberg™ collection. Despite these efforts, Project Gutenberg™ electronic works, and the medium on which they may be stored, may contain “Defects,” such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment.

1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right of Replacement or Refund” described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg™ trademark, and any other party distributing a Project Gutenberg™ electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE.

1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem.

1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.

1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions.

1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg™ electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg™ electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg work, (b) alteration, modification, or additions or deletions to any Project Gutenberg work, and (c) any Defect you cause.

Section 2. Information about the Mission of Project Gutenberg

Project Gutenberg is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life.

Volunteers and financial support to provide volunteers with the assistance they need are critical to reaching Project Gutenberg’s goals and ensuring that the Project Gutenberg collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation information page at www.gutenberg.org.

Section 3. Information about the Project Gutenberg Literary Archive Foundation

The Project Gutenberg Literary Archive Foundation is a non-profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation’s EIN or federal tax identification number is 64-6221541. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state’s laws.

The Foundation’s business office is located at 41 Watchung Plaza #516, Montclair NJ 07042, USA, +1 (862) 621-9288. Email contact links and up to date contact information can be found at the Foundation’s website and official page at www.gutenberg.org/contact

Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation

Project Gutenberg™ depends upon and cannot survive without widespread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine-readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS.

The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit www.gutenberg.org/donate.

While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate.

International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff.

Please check the Project Gutenberg web pages for current donation methods and addresses. Donations are accepted in a number of other ways including checks, online payments and credit card donations. To donate, please visit: www.gutenberg.org/donate.

Section 5. General Information About Project Gutenberg electronic works

Professor Michael S. Hart was the originator of the Project Gutenberg concept of a library of electronic works that could be freely shared with anyone. For forty years, he produced and distributed Project Gutenberg eBooks with only a loose network of volunteer support.

Project Gutenberg eBooks are often created from several printed editions, all of which are confirmed as not protected by copyright in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition.

Most people start at our website which has the main PG search facility: www.gutenberg.org.

This website includes information about Project Gutenberg, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.

Table of Contents

- Center Pieces and Lunch Sets IN CROCHET WORK

- Instructions for Plate No. 1

- SMALL MEDALLION
- MEDIUM MEDALLION
- LARGE MEDALLION

- Instructions for Plate No. 2 SIZE OF CENTER PIECE, 24 INCHES

- Instructions for Plate No. 3

- Instructions for Plate No. 4 SIZE OF CENTER PIECE, 27 INCHES

- Instructions for Plate No. 5 SIZE OF CENTER PIECE, 27 INCHES

- Instructions for Plate No. 6 SIZE OF CENTER PIECE, 32 INCHES

- Instructions for Plate No. 7 SIZE OF LUNCH PIECE, 45 INCHES

- Instructions for Plate No. 8 SIZE OF CENTER PIECE, 27 INCHES

- Instructions for Plate No. 9 SIZE OF CENTER PIECE, 36 INCHES

- Instructions for Plate No. 10
- Instructions for Plate No. 11
- Instructions for Plate No. 12
- THE FULL PROJECT GUTENBERG™ LICENSE